I WANT TO EXPLAIN TO YOU ABOUT USB DATA COLOUR CODE AND HOW TO USE IT STEP BY STEP WHEN YOU WANT TO FLASH YOUR MOBILE DEVICE
The USB DATA CABLE as many people are using it for different purpose such as for data transfer from one device to another device, Charging Mobile phones and Portable radios and many more.
Let me explain it to you about this type of USB for a MOBILE FLASHING USE.
The USB DATA CABLE has four different color wires inside. The four of colors used in USB are as follows;
1.WHITE = DATA NEGATIVE -
2.GREEN = DATA POSITIVE +
3.RED = CHARGING WAY VOLT 5 (V5.)
4.BLACK.= THIS WAY IS GROUND .
The different in colors means different use for every wire inside and each wire is crucial to its function.
TO USE THIS CABLE TO DETECT MEDIATEK MOBILE WHEN YOU WANT TO FLASH VIA PC
and all dot are named as DM,DP,VCHG or VBAT
Then prepare your USB and the cable must be catted off then you will follow few steps
You will solder every wire on one dot.
Solder GREEN wire on DP dot
Solder WHITE wire on DM dot
Solder RED wire on VCHG dot (Red wire is a boot cable)
Solder BLACK wire on GND dot (Black wire is a ground cable)
ENJOY IT
WRITTER:JAFARY MIRAJY
jmirajy@gmail.com
FACEBOOK@jafary mirajy
PHONE +255 655 771 636
Tags
gsm